new product Current：Home > Product List > new product
C-Top Controller
| Technical Parameters | ICS integrated controller |
|---|---|
| Pressure reducing valve | Can be matched |
| 24V DC | |
| information feedback | PNP/NPN |
| Sensor / proximity switch | 2 TOP adjustable sensor sensors (effective stroke range 65mm) |
| Power consumption (1 solenoid valve and one activated sensor) | 24V DC<50ma |
| 1 to 3 EV 3/2 | |
| Pneumatic form | NC normally closed type, NO normally open type, 1 solenoid valve |
| Trachea connector | R1/8" |
| Work pressure | 5-7bar |
SGK-SQ hand-air ...
| Technical Parameters | |
| ◆specification：DN8 DN15 | ◆Operating temperature：-10℃To120℃ |
| ◆Connection method: welding, clamp, thread | ◆Maximum sterilization temperature：120~150°C |
| ◆Maximum working pressure：≤8bar | ◆Contact with material: SS316L Other parts SS304 |
| ◆Maximum sterilization pressure：≤3bar | ◆Inner surface contact product：Ra≤0.8μm |
| ◆Seals：EPDM/SI | |
SGM-HT fine-tunin...
| Technical Parameters | |
| ◆specification：DN8 DN10 DN15 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread | ◆Maximum sterilization temperature：120~150°C |
| ◆Maximum working pressure：≤8bar | ◆Contact with material: SS316L Other parts SS304 |
| ◆Maximum sterilization pressure：≤3bar | ◆Inner surface contact product：Ra≤0.8μm |
| ◆Seals：PTFE | |
SGM manual asept...
| Technical Parameters | |
| ◆specification：DN6 DN8 DN10 DN15 | ◆Operating temperature：-10℃到120℃ |
| ◆Connection method: welding, clamp, thread | ◆Maximum sterilization temperature：120~150°C |
| ◆Maximum working pressure：≤8bar | ◆Contact with material: SS316L Other parts SS304 |
| ◆Maximum sterilization pressure：≤3bar | ◆Inner surface contact product：Ra≤0.8μm |
| ◆Seals：PTFE | |
Hand-operated sel...
| Technical Parameters | |
| ◆specification：1"～2" DN25～DN50 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread, flange | ◆Contact with material: SS304/SS316L |
| ◆Maximum working pressure: ≤8bar | ◆Inner surface contact product: Ra≤0.8μm |
| ◆Seals: EPDM, silicone rubber (SI), fluororubber (FPM) | |
Micro Flow Control Valve
| Technical Parameters | |
| ◆specification：DN4～DN8 | ◆Contact with material：SS304/SS316L |
| ◆Connection method: welding, clamp | ◆Inner surface contact product：Ra≤0.8μm |
| ◆Maximum working pressure：≤8bar | ◆Seal: PTFE（PTFE） |
| ◆Working temperature: -10 ° C to 120 ° C | ◆Power supply / signal: DC 24V/4-20mA |
SGM-H fine-tuning...
| Technical Parameters | |
| ◆specification：DN8 DN10 DN15 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread | ◆Maximum sterilization temperature：120~150°C |
| ◆Maximum working pressure: ≤8bar | ◆Contact with material: SS316L Other parts SS304 |
| ◆Maximum sterilization pressure: ≤3bar | ◆Inner surface contact product: Ra≤0.8μm |
| ◆Seal: PTFE | |
SGM-K manual qui...
| Technical Parameters | |
| ◆specification：DN8 DN10 DN15 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread | ◆Maximum sterilization temperature：120~150°C |
| ◆Maximum working pressure：≤8bar | ◆Contact with material: SS316L Other parts SS304 |
| ◆Maximum sterilization pressure: ≤3bar | ◆Inner surface contact product: Ra≤0.8μm |
| ◆Seal: PTFE/SI/EPDM | |
SGM-SQ Hand-Air ...
| Technical Parameters | |
| ◆specification：DN8 DN10 DN15 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread | ◆Maximum sterilization temperature：120~150°C |
| ◆Maximum working pressure：≤8bar | ◆Contact with material: SS316L Other parts SS304 |
| ◆Maximum sterilization pressure：≤3bar | ◆Inner surface contact product：Ra≤0.8μm |
| ◆Seals：PTFE | |
Home
|
About US|
News List|
Product List COPYRIGHT ? 2018 Wenzhou Sugong Fluid Equipment Technology Co., Ltd.