Aseptic Sampling Valve Current：Home > Product List > Aseptic Sampling Valve
SGK-Q Pneumatic ...
| Technical Parameters | |
| ◆specification：DN8 DN15 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread | ◆Maximum sterilization temperature：120~150°C |
| ◆Maximum working pressure：≤8bar | ◆Contact with material: SS316L Other parts SS304 |
| ◆Maximum sterilization pressure：≤3bar | ◆Inner surface contact product：Ra≤0.8μm |
| ◆Seals：EPDM/SI | |
SGK-SQ hand-air ...
| Technical Parameters | |
| ◆specification：DN8 DN15 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread | ◆Maximum sterilization temperature: 120~150°C |
| ◆Maximum working pressure: ≤8bar | ◆Contact with material: SS316L Other parts SS304 |
| ◆Maximum sterilization pressure: ≤3bar | ◆Inner surface contact product: Ra≤0.8μm |
| ◆Seal: EPDM/SI | |
SGK manual asept...
| Technical Parameters | |
| ◆specification：DN8 DN15 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread | ◆Maximum sterilization temperature: 120~150°C |
| ◆Maximum working pressure: ≤8bar | ◆Contact with material: SS316L Other parts SS304 |
| ◆Maximum sterilization pressure: ≤3bar | ◆Inner surface contact product: Ra≤0.8μm |
| ◆Seal: SI/EPDM | |
SGM-HT fine-tunin...
| Technical Parameters | |
| ◆specification：DN8 DN10 DN15 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread | ◆Maximum sterilization temperature: 120~150°C |
| ◆Maximum working pressure: ≤8bar | ◆Contact with material: SS316L Other parts SS304 |
| ◆Maximum sterilization pressure: ≤3bar | ◆Inner surface contact product: Ra≤0.8μm |
| ◆Seal: PTFE | |
SGM-H fine-tuning...
| Technical Parameters | |
| ◆specification：DN8 DN10 DN15 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread | ◆Maximum sterilization temperature: 120~150°C |
| ◆Maximum working pressure: ≤8bar | ◆Contact with material: SS316L Other parts SS304 |
| ◆Maximum sterilization pressure: ≤3bar | ◆Inner surface contact product: Ra≤0.8μm |
| ◆Seal: PTFE | |
SGM-K manual qui...
| Technical Parameters | |
| ◆specification：DN8 DN10 DN15 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread | ◆Maximum sterilization temperature：120~150°C |
| ◆Maximum working pressure: ≤8bar | ◆Contact with material: SS316L Other parts SS304 |
| ◆Maximum sterilization pressure: ≤3bar | ◆Inner surface contact product: Ra≤0.8μm |
| ◆Seal: PTFE/SI/EPDM | |
SGM-Q Pneumatic ...
| Technical Parameters | |
| ◆specification：DN8 DN10 DN15 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread | ◆Maximum sterilization temperature: 120~150°C |
| ◆Maximum working pressure: ≤8bar | ◆Contact with material: SS316L Other parts SS304 |
| ◆Maximum sterilization pressure: ≤3bar | ◆Inner surface contact product: Ra≤0.8μm |
| ◆Seal: PTFE | |
SGM-SQ Hand-Air ...
| Technical Parameters | |
| ◆specification：DN8 DN10 DN15 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread | ◆Maximum sterilization temperature: 120~150°C |
| ◆Maximum working pressure: ≤8bar | ◆Contact with material: SS316L Other parts SS304 |
| ◆Maximum sterilization pressure: ≤3bar | ◆Inner surface contact product: Ra≤0.8μm |
| ◆Seal: PTFE | |
SGM manual asept...
| Technical Parameters | |
| ◆specification：DN6 DN8 DN10 DN15 | ◆Working temperature: -10 ° C to 120 ° C |
| ◆Connection method: welding, clamp, thread | ◆Maximum sterilization temperature: 120~150°C |
| ◆Maximum working pressure: ≤8bar | ◆Contact with material: SS316L Other parts SS304 |
| ◆Maximum sterilization pressure: ≤3bar | ◆Inner surface contact product: Ra≤0.8μm |
| ◆Seal: PTFE | |
Home
|
About US|
News List|
Product List COPYRIGHT ? 2018 Wenzhou Sugong Fluid Equipment Technology Co., Ltd.